Moss Motors, Ltd

Hi there!!

 

My name is Pedro Santos and i`m from Portugal

I have bought my mini about 5 years ago and finally i`m restoring it!!! Has been stored in my garage.

Having already purchased several parts from MOSS (and quite happy with the service) i face a problem, i cant seem to find front turn signal lamps anywere!!! and minha are shatered! Anyone knows how i can get some??

 

Thank you

 

Pedro Santos

---

Pedro Santos aka AmigaMAN

Hi Pedro

Firstly welcome to the forum and if you have any questions please ask away.

The turn signal lamp you have asked about are really hard to find! the LH unit ADU3017 is in stock @ MossEurope but the RH unit ADU3018 issadly not available new any more! At a push you can use two LH units but you will have to drill some new hole as one will be upside down! Good luck with the restoration Pedro.

---

Oz Cooper
Classic Mini Product Manager UK


Helpful Links:
Code of Conduct
FAQs
Moss Europe Ltd

Disclaimer: Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.

is that part the complete part or only the plastic outside of it ???

---

Pedro Santos aka AmigaMAN

Hi Pedro,

The part numbers above are complete units.

---

Oz Cooper
Classic Mini Product Manager UK


Helpful Links:
Code of Conduct
FAQs
Moss Europe Ltd

Disclaimer: Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.

Thanks!! I think that way i might just fit it in there, i actually only need the "glass" (plastic outside) part, since one of them is broken and i believe that fisically they are similar!

By the way, is ther any open forum or something related to converting a 1275 cc engine into a 1380??

 

 

---

Pedro Santos aka AmigaMAN

Have you been here, Pedro ?

http://www.britishcarforum.com/bcforum/ubbthreads.php/forums/15/1/Minis