Moss Motors, Ltd

Our Sites: Moss USA | Moss Europe
Welcome to Moss Motors, Ltd Sign in | Join | Help
in Search

Wiring Problems

Last post 10-27-2007, 10:01 AM by TechTipAdmin@Moss. 0 replies.
Sort Posts: Previous Next
  •  10-27-2007, 10:01 AM 10445

    Wiring Problems

    Two basic tools are essential for trouble shooting electrical problems - a wiring diagram, and a 12 volt test light. A test light is an inexpensive little tool that looks like a cross between an ice pick and an electric screwdriver. Simple to use, it is connected by its clip to a ground. The sharp probe is poked around the "hot" leads. If the lamp lights, there's power, at least to that part of the circuit. For example, clip the test light to a bumper bolt or other good ground and touch the probe to a bulb contact on the "hot" side - the bulb will light, (so long as the light is "on").
    Most lamp problems are conveniently found in the lamp unit itself. The great majority are caused by bad bulb contacts or corroded grounds. Don't assume that there are major problems until the non-functioning unit is completely inspected. Using the wiring diagram, work your way back through the circuit to the connectors, and from there to the source of power such as the fuse box or terminal connector. By this method, you should be able to determine whether an entire circuit or the individual unit is at fault. If the circuit is dead, track the problem from the fuse box or battery side of that particular circuit. Proceed through the circuit components one at a time, using the wiring diagram as a guide. Don't panic!
    After reading both these articles, you should be well on your way to trouble-shooting Lucas electrics.
    Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.

    If you have a specific comment or question and you'd like an immediate reply from Moss Tech Services, don't post here - please first email: BritishTechnicalSupport@mossmotors.com Please include the Title and Location of this tip if applicable.

    Forum FAQs here.