Next time you pop the cap on your Lucas distributor, take a moment to put a few drops of oil on the screw under the rotor- there are holes under the screw and the oil will lubricate the cam bearing. While you're at it, lubricate the advance mechanism and the breaker point pivot. Use light engine oil. If you are out of grease, a drop on the breaker cam lobes won't hurt.
Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.If you have a specific comment or question and you'd like an immediate reply from Moss Tech Services, don't post here - please first email: BritishTechnicalSupport@mossmotors.com Please include the Title and Location of this tip if applicable.
Forum
FAQs here.