Frozen Piston Repair After parking the TR250 that got me through four years of college, I never intended to wait nine years to put it on the road again. Besides, I was ignorant, so I didn't drain any fluids or do any of the preventative things I should have done. The car sat on the ground under a shelter enclosed on four sides (including the roof, which only leaked a little). So, things rusted and generally deteriorated.
This winter, ready to get going on the car, I decided to tackle the clutch hydraulics first, while someone smarter (and now richer) than I rebuilt the engine and gearbox. The clutch master cylinder dust boot had ceased to exist, and the piston was rusted into place. I hit it with a hammer. I swore. I despaired. Then I called my mechanically-minded father-in-law who loves nothing more than nursing a problem like this. He suggested hot water.
I put the master cylinder in a saucepan, covered it with water and put it on medium high for about an hour and a half. I never let it boil, but it was close to boiling, with small bubbles forming and rising to the top. When I removed the master cylinder the piston was free!
Speed Hallman
Boone, NC
Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.Email (for Moss Tech help):
BritishTechnicalSupport@mossmotors.comEmail (for comment on Forum Tech Tips):
TechTipAdmin@mossmotors.com