hey, that was cool. I clicked on the picture and went to the original on your web site. Just like clicking my heels together.
Hmm. I've not seen this stripe design on a Midget before. The one I was thinking about was the "Special" kit that came out in 76. There is a good picture of it in the "Original Sprite/Midget" book.
The one on your car looks like the same general design as used on the MGB. Check out this link:
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29112&SortOrder=1
Sorry for the poor image. It looks like you could do a bit of trimming with a razor to remove the "B" and perhaps get what you need. Lining up the tape widths on the shorter car may be a problem though. It would be worth trying if you were set on the kit.
The original part number for the MGB kit was BLM105211, so chances are the Midget kit part number would be somewhere close. Sorry, but we have the MGB graphics manufactured specifically for us and the company SFAIK does not make any others.
If we had a ground swell of other Sprite/Midget owners that wanted these side stripe kits, we would look at having them made, but even the MGB ones are not huge sellers.
Hoping this is some help
Kelvin Dodd
Global Sourcing Engineer
Moss Motors, Ltd.
Helpful Links:
Code of ConductFAQsDisclaimer: Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.