Hold on to your hat, because I'm going to tell you about the easiest way you've ever seen to remove the hinge pins from your T-Series bonnet, without marking it up or otherwise making it impossible to reinstall.
Soak the hinge pins overnight with a penetrating lubricant. Using a suitably sized punch or drift, knock the pin out either end about two inches. Chuck the end of the pin in a hand held drill (unplugged) and tighten. You can then use the drill's grip to slowly tighten, then slowly rotate the pin, as you withdraw it from the bonnet. The same procedure can be used for replacement.
Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.If you have a specific comment or question and you'd like an immediate reply from Moss Tech Services, don't post here - please first email: BritishTechnicalSupport@mossmotors.com Please include the Title and Location of this tip if applicable.
Forum
FAQs here.