Here's a tip to make the removal and installation of dash control cables much less difficult. First, disconnect the battery (good to do when working behind the dash as there may be exposed "hot" terminals). Then, disconnect the cable from what it is controlling, for example, the heater valve. Thread an appropriate sized deep-well socket over the cable to the retaining nut, and with a pair of pliers or vise-grip, turn the socket to loosen the nut. It's much easier than trying to get a wrench in there.
Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.Email (for Moss Tech help):
BritishTechnicalSupport@mossmotors.comEmail (for comment on Forum Tech Tips):
TechTipAdmin@mossmotors.com