Moss Motors, Ltd

I'm restoring a aluminum surrey top, it had no listing rods or clips, I orderd the clips but need Ideas on what to make listing rods from,and I would really like it if I could get a photo of a finished headliner to see where fabric is glued to  the back of the top.  Thanks Steves TR4

I'am just finshing mine, 64 tr4 surrey aluminum top I seem to forgot how to upload the url on photo's

---

The only dum question is the one not asked

Make sure you're signed in. Hit "Reply" then above the message typing area, there are a number of icons. The first one looks like a link of chain; click that and then you'll be able to enter the address of the pictures on the web.

Christine 

---

Christine Knight
Marketing Assistant

Helpful Links:
Code of Conduct
FAQs

Disclaimer:Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.

where do you find address

---

The only dum question is the one not asked

At the top of your browser bar; for example, where you type "www.mossmotors.com" to go to our site.

For FAQs about how to use your Gallery here on our Forum, please read: http://www.mossmotors.com/forum/forums/thread/3016.aspx

Christine 

---

Christine Knight
Marketing Assistant

Helpful Links:
Code of Conduct
FAQs

Disclaimer:Working on automobiles is inherently dangerous. Moss Motors, Ltd. is not liable for injury or damage due to incorrect installation or use of their products. All products are sold with the understanding that the safe and proper installation and use of the products is the customer’s responsibility. Follow factory workshop manual procedures and instructions, but use current shop safety standards and common sense. Some tasks will require professional advice or services which Moss Motors cannot provide.

I put all pics on my photo's you can see some of the fit's and the gap's , top front of side glass,  both sides

---

The only dum question is the one not asked

 HPIM2678.JPG        steve also the seal top front of the surrey top, I believe the seal is to short it should hang over the end of the A post so the side glass rolles up and it all goes together .  This pic the top is not bolted down so it looks high I'll get a better pic

---

The only dum question is the one not asked

 HPIM2665bb.jpg   here is a pic of where it should go I'am going to take mine off and see if I can stretch it over

---

The only dum question is the one not asked

Steve here is where the glue goes   HPIM266700.jpg

---

The only dum question is the one not asked

Hi, I thx , your pics will help me when I assemble mine, It's in the paint shop right now. Great tips on how to make seals fit better, Did you by chance have any idea's on what to make the listing rods out of ? Your car looks great, it sure is one to be proud of !! 

Thanks Steves Pearl WhiteTR4

I would go to a junk yard get some from a old car bend and cut to size

---

The only dum question is the one not asked

Thx, I'll try it.