Moss Motors, Ltd

This will be my home I am sure! If you are looking to Improve the performance, whether its engine brakes or handling this section of the forum is the place to ask.  

---

Oz Cooper
Classic Mini Guru UK

Just purchased a 1970 Innocenti Mini.

I have an order in for a Pertronix neg ground upgrade.

The car came to me with oversized Minilites, Yokohama's, and about 3 degrees of negative camber.  It is so much that there is no wear on the outside of the front tires.  I want to reduce the amount of camber to help to take the twitchiness out of the steering. 

 I see Moss has adjustable lower a-arms to adjust camber amount (part# 115-015 ).  My question: will these a-arms adjust to add positive camber into the setup?

 

Thanks in advance,

EnglishCarHunter

Hi there

The image below show the fixed set on the right and the adjustables on the left! What isn't shown in the image is the different ends that are included in the kit. The other ends replace the rose joints with a standard bush type fitting! These are perfect if you need to adjust the camber on the front of the car. Idealy you want 1.5 degrees of negative camber on the front. Hope that helps answer your question.

Oz

 

---

Oz Cooper
Classic Mini Guru UK