Moss Motors, Ltd. British Marques Moss Motors, Ltd. Moss Motors British Cars
Moss Motors, Ltd. HOME NEW PRODUCTS CLOSEOUTS STORIES BLOG FREE CATALOG MEDIA Moss Motors, Ltd.
Triumph TR2, 3, 4
Restoration and Accessory Parts Checkout
Items: 0
Subtotal: $ 0.00
Front Suspension TR2-4
KeyPart #PriceDescriptionApplicationQty
Rqd
Qty 
1A 660-988 $99.99
SUSPENSION KIT 
TR2-4 to CT7218 1
660-978 $129.99
SUSPENSION KIT
TR4 from CT7219 1
1 661-000 $59.99
FULCRUM PIN, upper
2
2 680-130 $0.49
BUSHING, rubber, upper wishbone
Note: Included in suspension kit.
8
683-000 $29.99
BUSHING KIT, polyurethane, upper wishbone, set of 4 to replace original 8, SuperPro, blue
Note: Polyurethane will not deteriorate from the effects of ozone, is far more wear resistant than rubber, and eliminates 90% of suspension deflection, yet provides a firm and quiet ride. These will outlast stock bushings by 2-3 times.
TR2-4 1
680-134 $44.99
BUSHING KIT, polyurethane, upper wishbone, set of 8, Prothane brand, red
Note: Polyurethane will not deteriorate from the effects of ozone, is far more wear resistant than rubber, and eliminates 90% of suspension deflection, yet provides a firm and quiet ride. These will outlast stock bushings by 2-3 times.
TR2-4 1
681-235 $19.99
BUSHING KIT, polyurethane, upper wishbone, set of 8, aftermarket, black
Note: Polyurethane will not deteriorate from the effects of ozone, is far more wear resistant than rubber, and eliminates 90% of suspension deflection, yet provides a firm and quiet ride. These will outlast stock bushings by 2-3 times.
TR2-4 1
3 324-380 $0.69
WASHER
Note: Included in suspension kit.
4
4 325-105 $0.19
COTTER PIN
Note: Included in suspension kit.
4
5 310-330 $1.09
NUT, slotted
Note: Included in suspension kit.
4
310-320 $1.79
NUT, nyloc (alternate to slotted nut)
4
8 661-020 N/A
CONTROL ARM, upper, R/H rear & L/H front
TR2-4 to CT6343 (wire) CT6390 (disc) 2
9 661-010 N/A
CONTROL ARM, upper, R/H front & L/H rear
TR2-4 to CT6343 (wire) CT6390 (disc) 2
10 661-070 $16.99
BALL JOINT ASS'Y (w/nut and boot)
TR2-4 to CT6343 (wire) CT6390 (disc) 2
11 328-580 $1.69
GREASE NIPPLE
TR2-4 to CT6343 (wire) CT6390 (disc) 2
12 011-914 $2.19
BOOT
TR2-4 to CT6343 (wire) CT6390 (disc) 2
13 310-635 $1.49
NUT, nyloc (alternate)
TR2-4 to CT6343 (wire) CT6390 (disc) 2
N/A N/A
NUT, slotted
TR2-4 to CT6343 (wire) CT6390 (disc) 2
14 325-750 $0.20
COTTER PIN
TR2-4 to CT6343 (wire) CT6390 (disc) 2
15 324-270 N/A
WASHER
TR2-4 to CT6343 (wire) CT6390 (disc) 2
16 661-090 N/A
DISTANCE PIECE
TR2-4 to CT6343 (wire) CT6390 (disc) 2
17 322-660 $0.59
CAP SCREW, fulcrum pin to frame (inner)
4
18 322-025 $0.89
BOLT, fulcrum pin to frame (outer)
4
19 310-050 $0.59
NUT
4
20 661-060 $96.99
CONTROL ARM, upper rear
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 2
21 661-050 $96.99
CONTROL ARM, upper front
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 2
22 661-080 $24.99
BALL JOINT PAIR (w/nut, boot and clip)
Note: Permanently lubricated (no grease nipple)
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 1
23 661-085 N/A
CLIP, boot retaining
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 2
24 680-760 $1.89
BOOT
Note: Included in suspension kit.
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 2
25 328-505 $0.89
GREASE NIPPLE
Note: as fitted
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 2
26 320-245 $3.39
BOLT, ball joint to wishbone
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 4
27 310-240 $0.39
NUT, nyloc
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 4
28 315-010 $0.29
WASHER, plain
TR4 from CT6344 (wire whl.) CT6391 (disc whl.) 4
30 324-880 $0.49
WASHER, ball joint to vert. link
2
31 310-400 $0.79
NUT, nyloc
2
32 661-100 $269.99
VERTICAL LINK
2
33 661-130 N/A
LEVER, tie rod, R/H
TR2-3B 1
661-140 N/A
LEVER, tie rod, L/H
TR2-3B 1
661-150 N/A
LEVER, tie rod, R/H
TR4 to CT6343, (wire wheel), CT6389 (disc wheel) 1
661-160 N/A
LEVER, tie rod, L/H
TR4 to CT6343, (wire wheel), CT6389 (disc wheel) 1
661-170 N/A
LEVER, tie rod, R/H
TR4 to CT6344-16462 (wire whl.), CT6390-16349 (disc whl.) 1
661-180 N/A
LEVER, tie rod, L/H
TR4 to CT6344-16462 (wire whl.), CT6390-16349 (disc whl.) 1
661-190 N/A
LEVER, tie rod, R/H
TR4 from CT16463 (wire whl.), CT16350 (disc whl.). 1
661-200 N/A
LEVER, tie rod, L/H
TR4 from CT16463 (wire whl.), CT16350 (disc whl.). 1
34 661-280 $4.99
DISTANCE PIECE
4
39 310-690 $0.39
NUT, stub axle to vertical link
2
40 324-880 $0.49
WASHER, stub axle to vertical link
2
41 661-290 $31.99
STUB AXLE
Note: For upgraded axle kit, click here.
2
661-293 $449.99
FRONT AXLE KIT, upgraded, set of 2
Note: The TR2-6 stub axles flex under load, and the harder you drive, the more they flex. When this happens, the calipers pistons are pushed back into the calipers. When you step on the brakes, the pedal travel is excessive because the pistons have farther to go before the pads touch the rotors. This kit solves the problem with stronger stub axles, which are further reinforced by rigidly clamping a collar between the bearing races. Instructions are included.
TR2-4 1
42 661-230 N/A
PLATE, caliper mounting, R/H
TR3 from TS13046-TR4 to CT4689 (wire), CT4389 (disc) 1
661-240 $21.00
PLATE, caliper mounting, L/H
TR3 from TS13046-TR4 to CT4689 (wire), CT4389 (disc) 1
661-250 N/A
PLATE, caliper mounting, R/H
TR4 from CT4690 (wire wheel)CT4388 (disc wheel) 1
661-260 N/A
PLATE, caliper mounting, L/H
TR4 from CT4690 (wire wheel)CT4388 (disc wheel) 1
43 661-270 $0.89
TAB WASHER
4
44 N/A N/A
BOLT, tie rod lever to vert. link, front
TR2-3 to TS13045 2
320-280 N/A
BOLT, tie rod lever to vert. link, front
TR3 from TS13046-TR4 2
45 N/A N/A
BOLT, tie rod lever to vert. link, rear
TR2-3 to TS13045 2
320-340 $1.39
BOLT, tie rod lever to vert. link, rear
TR3 from TS13046-TR4 2
46 N/A N/A
BOLT, backing plate to vert. link, front
TR2-3 to TS13045 2
322-590 $0.49
BOLT, caliper mount to vert. link, front
TR3 from TS13046-TR4 2
47 N/A N/A
BOLT, backing plate to vert. link, rear
TR2-3 to TS13045 2
320-240 N/A
BOLT, caliper mnt. to vert. link, rear
TR3 from TS13046-TR4 2
48 310-240 $0.39
NUT, for bolts
4\6
49 525-220 $19.49
WHEEL BEARING KIT (incl. 2 bearings and seal)
2
50 520-160 $4.89
GREASE SEAL, felt w/steel backing
2
51 525-130 $17.89
BEARING, inner
2
52 525-140 $16.89
BEARING, outer
2
53 324-890 $1.99
D WASHER
2
54 310-410 $1.69
NUT, slotted
2
55 325-435 $0.19
COTTER PIN
2
56 661-430 $2.39
CAP, grease retaining
2
60 661-300 N/A
HUB, disc wheel
TR2-3 to TS13045 2
61 661-320 $5.29
STUD, disc wheel
TR2-3 to TS13045 8
64 661-340 N/A
HUB, wire wheel, R/H
TR2-3 to TS13045 1
661-350 N/A
HUB, wire wheel, L/H
TR2-3 to TS13045 1
65 661-380 N/A
PEG, collar locating (long)
TR2-3 to TS13045 2
66 661-370 N/A
PEG, brake drum to hub (short)
TR2-3 to TS13045 6
67 661-390 N/A
COLLAR, tapered, wire wheel
TR2-3 to TS13045 2
70 661-311 $259.99
HUB, disc wheel (without studs)
TR3 from TS13046 fhru TR4 2
71 661-338 $17.99
STUD SET (4), disc wheel, front
TR3 from TS13046 thru TR4 2
661-330 $4.99
STUD, disc wheel, front
TR3 from TS13046 fhru TR4 8
72 674-660 $2.39
LUGNUT, disc wheel
TR3 from TS13046 fhru TR4 8
74 661-311 $259.99
HUB, wire wheel (without studs)
TR3 from TS13046 fhru TR4 2
75 661-400 $4.39
STUD, wire wheel, front
TR3 from TS13046 fhru TR4 8
76 661-410 $69.99
HUB EXTENSION, splined, R/H
TR3 from TS13406 thru TR4 1
661-420 $69.99
HUB EXTENSION, splined, L/H
TR3 from TS13406 thru TR4 1
77 675-070 $0.69
NUT, extension to hub
TR3 from TS13406 thru TR4 16
80 661-660 $2.39
WASHER, rubber (stock type), 0.150" thick flange
6\4
661-661 N/A
WASHER, polyurethane, 0.120" thick flange
option 6\4
661-662 N/A
WASHER, polyurethane, 0.325" thick flange
option A/R
81 661-670 $23.99
PACKING PIECE, aluminum
TR2-4 to CT29984 2
82 661-630 $69.99
COIL SPRING (9 3/4", 310 lb/in)
Note: The later springs 661-635 or 661-636 may be used in pairs as replacements, without the aluminum packing pieces 661-670.  This conversion is specified in the TR4 factory workshop manual.
TR2-4 to CT29984 2
661-635 $54.99
COIL SPRING (approx. 11.1", 312 lb/in)
TR4 from CT29985 2
661-636 $154.99
SPRING SET, front, standard (11.1", 312 lb/in), Suplex brand, pair
Note: These springs are used without packing piece 661-670. Made in Germany of silicon-chrome steel, which makes them lighter and more durable than conventional springs. Five-year warranty.
TR2-4 1
670-171 $149.99
SPRING SET, front, fast/road (9", 390 lb/in), Suplex brand, pair
Note: These springs are very close to the factory "competition" spring 201899, and require packing piece 661-670. Made in Germany of silicon-chrome steel, which makes them lighter and more durable than conventional springs. Five-year warranty.
TR2-4 1
264-486 $159.99
SPRING SET, front, competition (420 lb/in), Suplex brand, pair
Note: Lowers car slightly. Not recommended for street use! Made in Germany of silicon-chrome steel, which makes them lighter and more durable than conventional springs. Five-year warranty.
TR2-4 1
86 670-007 $22.99
SHOCK ABSORBER, front, stock type (individual)
TR2-4 2
683-322 $319.99
SHOCK ABSORBER, front, Koni (pair)
TR2-4 1
87 011-943 $1.19
MOUNTING RUBBER, shock, upper, stock type rubber
TR2-4 4
683-097 $31.99
MOUNTING SET, shock, upper, SuperPro blue polyurethane, set of 4
TR2-4 1
681-245 $9.99
MOUNTING SET, shock, upper, black polyurethane, set of 4
Note: Polyurethane will not deteriorate from the effects of ozone, is far more wear resistant than rubber, and eliminates 90% of suspension deflection, yet provides a firm and quiet ride. These will outlast stock bushings by 2-3 times.
TR2-4 1
88 680-170 $0.89
MOUNTING RUBBER, shock, lower
TR2-4 4
89 661-680 $21.89
PIN & BRACKET
2
90 661-690 $11.99
BRACKET
2
91 661-700 $1.89
TAB WASHER
2
92 320-425 $0.59
BOLT
2
94 520-200 $1.69
GREASE SEAL, trunnion
Note: Included in suspension kit.
TR2-4 to CT7218 2
520-220 $1.19
GREASE SEAL, trunnion, stock type
Note: Included in suspension kit.
TR4 from CT7219 2
95 661-440 $149.99
TRUNNION, flat top (0° castor)
Note: This trunnion uses seal 520-200. Current trunnion pins are drilled for cotter pins.
TR2-4 to CT6343 (wire wheel) CT6389 (disc wheel) 2
661-441 $89.49
TRUNNION, chamfered top (0° castor)
Note: This trunnion uses grease seal 520-220 or 683-091 for improved sealing over the original type. Current trunnion pins are not drilled for cotter pins. Use nyloc nut #310-320 (2 per trunnion).
TR2-4 to CT6343 (wire wheel) CT6389 (disc wheel) 1
661-450 $87.99
TRUNNION, R/H (3° castor)
Note: Current trunnion pins are not drilled for cotter pins. Use nyloc nut #310-320 (2 per trunnion). Use grease seal 520-220 or 683-091.
TR4 from CT6343, (wire whl.), CT6390 (disc whl.) 1
661-460 $87.99
TRUNNION, L/H
Note: Current trunnion pins are not drilled for cotter pins. Use nyloc nut #310-320 (2 per trunnion). Use grease seal 520-220 or 683-091.
TR4 from CT6343, (wire whl.), CT6390 (disc whl.) 1
96 328-580 $1.69
GREASE FITTING
2
97 322-040 $0.49
BOLT
2
365-730 $0.25
LOCKWASHER for bolt
2
98 661-490 $3.69
STOP, steering lock
2
102 661-500 N/A
ARM, lower wishbone, R/H front, L/H rear
2
103 661-510 $399.99
ARM, lower wishbone, R/H rear, L/H front
2
104 330-260 $4.79
BUSH, wishbone arm
Note: Included in suspension kit.
4
105 328-580 $1.69
GREASE FITTING, lower wishbone arm
4
106 324-900 $1.89
THRUST WASHER
Note: Included in suspension kit.

 

8
108 661-550 $0.89
SEAL, wishbone
Note: Included in suspension kit.

 

8
109 661-560 $0.99
SHIM, for seal
Note: Included in suspension kit.
TR4 from CT7219 16
110 324-910 $5.89
WASHER, locking
Note: Included in suspension kit.
TR2-3 to TS13045 (use for TR2-TR4 thru CT7218) 4
324-912 N/A
WASHER, locking
Note: use earlier 324-910
TR3 from TS13046 thru TR4 CT7218 1
324-920 $5.99
WASHER, locking
Note: Included in suspension kit.
TR4 from CT7219 1
111 310-330 $1.09
NUT, slotted (for original trunnions)

 

4
310-320 $1.79
NUT, nyloc (for replacement trunnions)
Note: Included in suspension kit.

 

4
112 325-105 $0.19
COTTER PIN (for original slotted nuts)
4
113 661-620 $4.39
BUMP RUBBER
TR4 from CT7219 2
115 324-930 $1.39
WASHER, nylon
Note: Included in suspension kit.
8
116 661-550 $0.89
SEAL
Note: Included in suspension kit.
TR2 8
117 661-580 $5.49
BUSH, nylon
Note: Included in suspension kit.
TR3 from TS9121 thru TR4 4
118 661-570 $3.89
BUSH, steel
Note: Included in suspension kit.
4
122 310-320 $1.79
NUT, lower fulcrum pin
Note: Included in suspension kit.
4
123 661-590 N/A
BRACKET, lower fulcrum support
4
124 322-880 $0.49
BOLT, bracket to frame
8
125 310-140 $0.24
NUT
8
126 661-710 $4.89
REBOUND RUBBER ASS'Y.
2
129 328-705 $1.59
STUD, at inner end of lower wishbones
4
130 320-345 $0.79
BOLT, spring pan to wishbone
6
310-240 $0.39
NUT, for bolt, studs, & bump rubber
12
131 031-739 N/A
BRACKET, rebound abutment
2
132 661-600 N/A
SPRING PAN
2


Home  |   Your Account  |   New Products  |   Web Specials  |   Shopping Cart  |   Catalog  |   Index

© Copyright 2017 Moss Motors, Ltd. All Rights Reserved.

 
MiataMania SuperCharger
www.mossmiata.com www.supercharger.com